Variable Speed Drive, Altivar Process ATV900, ATV930, 160kW, 400 to 480V, without braking unit, IP00
ATV930C16N4C
| Part number | ATV930C16N4C |
| Range of Product | Altivar Process ATV900 |
| Product Specific Application | Process for industrial |
| Product or Component Type | Variable speed drive |
| Variant | Without braking chopper |
| Standard version | |
| Device Application | Industrial Application |
| Product destination | Synchronous motors |
| Asynchronous motors | |
| Phase | 3 phase |
| Mounting Mode | Wall mount |
| Continuous output current | 302 A 2.5 kHz normal duty |
| 250 A 2.5 kHz heavy duty | |
| Communication Port Protocol | Modbus serial |
| Modbus TCP | |
| EtherNet/IP | |
| [Us] rated supply voltage | 380…480 V – 15…10 % |
| [Us] rated supply voltage | 380…480 V |
| Relative symmetric mains voltage tolerance | 10% |
| Relative symmetric network frequency tolerance | 5% |
| nominal output current | 302.0 A |
| Motor power kW | 160.0 kW normal duty |
| 132.0 kW heavy duty | |
| EMC filter | Integrated |
| With EMC plate option | |
| IP degree of protection | IP21 |
| Degree of protection | UL type 1 |
| Minimum switching current | Relay output R1, R2, R3 5 mA 24 V DC |
| Discrete input logic | 16 preset speeds |
| Physical interface | Ethernet |
| 2-wire RS 485 | |
| Connector Type | 2 RJ45 |
| 1 RJ45 | |
| Method of access | Slave Modbus TCP |
| Transmission Rate | 10, 100 Mbits |
| 4.8 kbps | |
| 9600 bit/s | |
| 19200 bit/s | |
| Transmission frame | RTU |
| Number of addresses | 1…247 |
| Data format | 8 bits, configurable odd, even or no parity |
| Type of polarization | No impedance |
| 4 quadrant operation possible | FALSE |
| Asynchronous motor control profile | Variable torque standard |
| Constant torque standard | |
| Optimized torque mode | |
| Synchronous motor control profile | Permanent magnet motor |
| Synchronous reluctance motor | |
| Maximum output frequency | 599 Hz |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.01…9999 s |
| Motor slip compensation | Automatic whatever the load |
| Can be suppressed | |
| Adjustable | |
| Not available in permanent magnet motor law | |
| Switching frequency | 1…8 kHz adjustable |
| 2.5…8 kHz with derating factor | |
| Nominal switching frequency | 2.5 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | FALSE |
| Line current | 284.0 A 380 V normal duty) |
| 237.0 A 380 V heavy duty) | |
| 262.0 A 480 V normal duty) | |
| 213.0 A 480 V heavy duty) | |
| Maximum Input Current per Phase | 284.0 A |
| Maximum output voltage | 480.0 V |
| Apparent power | 201.3 kVA 480 V normal duty) |
| 161.4 kVA 480 V heavy duty) | |
| Maximum transient current | 362 A 60 s normal duty) |
| 375 A 60 s heavy duty) | |
| Network Frequency | 50-60 Hz |
| Prospective line Isc | 50 kA |
| Base load current at high overload | 250.0 A |
| Base load current at low overload | 302.0 A |
| Quantity per Set | 1 |
| Width | 12.6 in (320 mm) |
| Height | 33.5 in (852 mm) |
| Depth | 15.5 in (393 mm) |
| Product Weight | 180.8 lb(US) (82 kg) |
