| Category | Item | Standard Parameter Value |
|---|---|---|
| Basic Identification | Full Catalog Number | 20DC045A0EYNANANE |
| Product Series | PowerFlex 700S High Performance AC Drive | |
| Manufacturer | Allen-Bradley / Rockwell Automation | |
| Frame Size | Frame 3 | |
| Lifecycle Status | Discontinued, End of Sale: June 30, 2023 | |
| Power Electrical Ratings | Rated Input Voltage | 3-Phase 380…480V AC (Code D = 480V class) |
| Input Frequency | 50 / 60 Hz | |
| Continuous Output Current (ND) | 45 A | |
| Rated Output Power @480V | 22 kW / 30 HP | |
| Output AC Voltage Range | 0 … equal to input line voltage | |
| Output Frequency Range | 0 … 500 Hz | |
| ND Overload Capacity | 110% for 60 sec; 150% for 3 sec | |
| PWM Switching Frequency | Default 4 kHz, adjustable 2–16 kHz | |
| Nominal DC Bus Voltage | 650 V DC | |
| Control & Motion Performance | Supported Control Modes | Sensorless Vector (SVC), Full Vector (FVC), V/Hz |
| Speed Regulation – Sensorless | ±0.1% of base speed | |
| Speed Regulation – Encoder Mode (optional) | ±0.01% of base speed | |
| Torque Response Bandwidth | Up to 50 rad/s standard; up to 100 rad/s HPTC optional | |
| Starting Torque at Low Speed | 150% rated torque at <0.5 Hz | |
| Accel / Decel Ramps | 4 independent sets, adjustable 0.1–999 sec, S-curve soft stop | |
| Auto-Tuning Routine | SMART Start / Assisted Startup motor auto-tune | |
| I/O Interface Specifications | Digital Inputs | 8 × 24V DC, sink/source configurable, isolated |
| Relay Digital Outputs | 3 × Form A relay, 250V AC / 30V DC, 2 A max | |
| Analog Inputs | 3 × isolated, 0–10 V / 4–20 mA, 12-bit resolution | |
| Analog Outputs | 1 × isolated, 0–10 V / 4–20 mA | |
| Encoder Feedback Port | 12V line-driver encoder interface (unused on this model) | |
| Communication Protocols | Onboard DPI Slot A (factory fitted) | EtherNet/IP dual port communication adapter |
| Standard Supported Protocols | EtherNet/IP, Modbus TCP, DPI internal drive bus | |
| Optional Fieldbus Adapters | DeviceNet, ControlNet, PROFIBUS DP, BACnet MS/TP | |
| PC Programming Software | Connected Components Workbench, DriveTools SP | |
| Mechanical Specifications | Enclosure / Protection Grade | IP20, NEMA Type 1, indoor cabinet installation only |
| Overall Dimensions (W × H × D) | 241 mm × 457 mm × 236 mm (Frame 3 IP20) | |
| Approximate Net Weight | 16.5 kg | |
| Cooling Method | Internal forced air cooling fan with maintenance filter | |
| Full Load Power Dissipation | 1150 W maximum | |
| Environmental Ratings | Operating Ambient Temperature (vertical mount) | 0 °C … +50 °C (derate above 40 °C) |
| Storage / Transportation Temperature | -40 °C … +70 °C | |
| Relative Humidity | 5–95% RH, non-condensing | |
| Vibration Compliance Standard | IEC 60068-2-6 | |
| Shock Compliance Standard | IEC 60068-2-27 | |
| Pollution Degree | Pollution Degree 2 | |
| Certifications & Compliance | Global Approvals | CE, cULus, RoHS compliant |
| Built-in Protection Functions | Standard Protections | Overcurrent, Overvoltage, Undervoltage, Motor Overload I²t, Drive Overtemp, Ground Fault, Stall Prevention, Input Phase Loss, Communication Fault, Load Loss Detection, Motor Thermistor Input Trip |
Allen-Bradley 20DC045A0EYNANANE 700S Inverter
David Chong
