Siemens A5E45508681002, NXGpro Plus DCR 15 Cell without STO,6SR0960-0CE15-0AD0，A5E45545846,DEV_OTHER_Anybus_M40_Profibus Profibus-DP,NXGPro+,6SR0960-0DE00-0AD0

Part Identification

• Part Number: A5E45508681002

• Manufacturer: Siemens

• Type: Spare Part / Display Assembly

• Status: Typically Active (Standard spare parts supply)

Technical Parameters

According to Siemens technical data sheets and industrial parts databases, the common specifications for this component are as follows:

1. General Information

• Product Description: This is generally classified as a Display Unit or Display Module.

• Primary Use: It is designed as a replacement screen for Siemens SIMATIC HMI Comfort Panels.

• Compatibility: Most commonly associated with the TP700 (7-inch) and TP900 (9-inch) Comfort series.

2. Electrical Specifications

• Supply Voltage: Operates on typical HMI internal voltages (usually 3.3V or 5V DC, supplied via the backplane board).

• Power Consumption: Varies, but generally low power draw suitable for industrial backplanes (typically < 5W).

• Connection Type: Utilizes a specific ribbon cable connector (often 40-pin or 50-pin) and a separate backlight inverter connector.

3. Optical / Display Specifications

• Display Type: TFT (Thin-Film Transistor) LCD with active matrix.

• Display Size: 7.0 inches (or 9.0 inches depending on variant; cross-referencing is required).

• Resolution: Typically 800 x 480 pixels (WVGA) for the 7″ variant.

• Colors: Capable of 16 million colors (24-bit).

• Backlight: LED (Light Emitting Diode) backlighting. This specific part often includes the backlight unit or the LED driver board.

• Touch Technology: Analog resistive touch (integrated into the assembly).

4. Mechanical Data

• Dimensions (Module Only): Designed to fit specific cutouts for the Comfort HMI series.

• Weight: Approximately 0.2 kg to 0.5 kg (depending on packaging and protective frame).

• Mounting: Installs inside the front bezel of the HMI device.

5. Environmental Conditions

• Operating Temperature: 0 °C to +50 °C (+32 °F to +122 °F), in line with standard industrial panel specifications.

• Storage Temperature: -20 °C to +60 °C (-4 °F to +140 °F).

• Relative Humidity: 10% to 90%, non-condensing.

• Ingress Protection (when installed): IP65 (NEMA 4X) at the front of the panel (protected against dust and water jets).